Gunning Mix for EAF
Categories：
Adventitious Refractory Material
Email：fuhaoyejin2024@163.com
Refractory castables mainly include common series,low-cement series, ultralow cement series and lightweight series,Which are used respectively for the following aspects according to their various features :
a. For hot blast stove system,secondary refining devices,up-take pipe lining,pretreatment hot metal ,lance for oxygen and argon blowing;
b. For steel making and steel rolling systems,EAF roof,triangle area of EAF roof,ladle,reheating furnace,soaking pit,inner lining of heat treating furnace,pre-cast block for water-cooling slide rails,soot blowing port，burner and fire blocking port.
c. For cement kiln,lining of tube Cooler,roof and innerlining on the cell bottom of float glass tank , petroleum cracking reactor,high-ternperature and abrasion resistant lining,Synthetic ammonia device and lining for gas furnace.
|
Item/Index |
WMDP-1 |
WMDP-2 |
WMDP-3 |
|
MgO,% |
≥88 |
≥78 |
65~ 70 |
|
CaO,% |
≤1.6 |
6~ 10 |
15~18 |
|
SiO2,% |
≤6.0 |
≤4.0 |
≤6.0 |
|
Critical grain size ,mm |
4 |
4 |
4 |
|
Max. service temperature,℃ |
1750 |
1750 |
1750 |
|
Application |
Used for hot zone ,slag–line ,furnace slope, taphole and wallof EAF |
||
Key words:
Gunning Mix for EAF
Previous page:
Next page:
Related Products
Leave a message
Leave your contact information and we will contact you during business hours
Tel:
Email:
Email: FuHao Office in Pakistan
Contact
